Cutting Fluids
Metcut Products
Environment friendly water mix fluids for most cutting operations and materials.
- Synthetic, semi-synthetic, vegetal or mineral base fluids.
- Longer tool life
- Equipment protection
- EP additives
- Low foaming
- High lubrication capacity
- High refrigerant capacity
- Bore and Nitrite free
- Excellent swarf removal
- Operator friendly
Deltacut Products
Neat cutting fluids for severe operations.
- Synthetic or mineral base fluids
- High lubrication capacity
- Low mist
- Excellent EP performance
- Low odour
- Operator friendly
Arclean Products
Low toxicity and biodegradable fluids, high flash point for spark erosion and honing operations.
- Excellent decantation property
- Excellent particle removal from sparking area capacity
- Easy filtration
- Chemically stable
- Ótima dissipação térmica
- Low viscosity
- High dielectric strength
Astraslide Products
Slideway lubricants.
- Viscosity grades from ISO VG 32 to ISO VG 220
- Corrosion prevention and with anti-wear additives
- Excellent separation from water based cutting oils
- Excellent filterability
Back to top
Corrosion Protection
Zoxol Products
A complete line of corrosion preventatives formulated with ”green” solvents, suited for any degree of protection.
- Oily, waxy and dried film formation.
- Dewatering capability
- Protection up to 240 sat-spray hours
- Water base preventative for inter-operational protection
Corrosion removal
Rust Off
Neutral product, non toxic and biodegradable, for corrosion removal on ferrous materials.
- Non corrosive
- Free from acids, alkalis or solvents
- Water soluble
- Does not attack others materials
- Does not release toxic vapours or bad odours
- Safe to the skin
Back to top
Metal Forming
Stamp Oil Products
Metal forming fluid with high performance and low cost
- Synthetic, vegetal or mineral base fluids
- With EP additives
- Easy application
- Protects the die and the part against corrosion
- Easy to remove
- Fluids suited to deep draw
- Fluids suited from light to hard metals
Metcut Products
High performance fluids for wire drawing
- Water soluble fluids
- Suited for all drawing stages and annealing
- Excellent particles removal capability
- Excellent protection
- Don’t causes metals stain
Hidroforja Products
Lubricants for cold, warm and hot forging. High performance and excellent cost-benefit ratio.
- Longer tool life
- Water and oil base products
- Low odour
- Low mist formation
Back to top
HYDRAULIC SYSTEMS
Liquimatic Products
Hydraulic fluids formulated with refined base oils
- Suited for high pressure systems
- Viscosity grades from ISO VG 32 to ISO VG 220
- Excellent filterability
- Excellent corrosion protection
- Optimum foam control
Back to top
|
